19 TNC Cmds 9.1 & 8.2
The commands below are for KPC3+ with 9.1 firmware
Black - text in the left column are the commands
Red - text in the right column are the parameters you need to change to your station parameters
Blue - text in the right column is the transmit level required for 2.5 kHz deviation
|
||||||||||||||||||||||||||||||||||||||||
NETCALL = Your Callsign-8 (144.970, Your Callsign-7 (145.690) Your Callsign-6 (440.125)
The commands below are for KPC3 / KPC3+ with 8.2 firmware
Black - text in the left column are the commands
Red - text in the right column are the parameters you need to change to your station parameters
Blue - text in the right column is the transmit level required for 2.5 kHz deviation
|
||||||||||||||||||||||||||||||||||||
NETCALL = Your Callsign-8 (144.970, Your Callsign-7 (145.690) Your Callsign-6 (440.125)