Trouble shooting

Packet station issues?

1.  Connected P2P no responce

                a. radio and tnc only responding not RMS Express

                b. in Winlink mode

2.  Not connected

                a. Station offline or different frequency

3. No TX light on TNC

                a. TNC is shut off or LED are shut off

                b. communication via serial port failed (reboot TNC) and  Remove and replace serial  to                     USB adapter

                d. TNC set to "CD Internal" and suelch to high (change CD to Software)

4.  When connecting I see a buch of commands on screens

                a. Station was switching between WL2K to P2P or vise versa  when you connected                                     

(restart TNC and program and try again)